2011 HAAS DS-30SSY W/BARFEED
CNC Lathes Multi-Axis
2011 HAAS DS-30SSY CNC Lathe with Barfeed, lightly used with 3,392 motion hrs & 3,134 spindle hrs. Features full C-axis, Y-axis, live milling, 24-station turret. Ready for inspection.
| SWING OVER BED | 31.75" |
| MAX CUTTING DIAMETER | 16" |
| MAX CUTTING LENGTH | 23" |
| X-AXIS TRAVEL | 12.5" |
| Y-AXIS TRAVEL | 4" (+/-2") |
| Z-AXIS TRAVEL | 23" |
| C-AXIS INDEXING | FULL C-AXIS |
| CHUCK SIZE | 8.3" |
| BAR CAPACITY | 2" |
| SPINDLE NOSE | A2-6 |
| SPINDLE MOTOR | 30 hp |
| SPINDLE SPEED | 4,800 RPM |
| RAPID TRAVERSE RATE - X-AXIS | 472 in/min. |
| RAPID TRAVERSE RATE - Y-AXIS | 472 in/min. |
| RAPID TRAVERSE RATE - Z-AXIS | 1,200 in/min. |
| SUB SPINDLE | Yes |
| SUB SPINDLE - CHUCK SIZE | 8.3" |
| SUB SPINDLE - BAR CAPACITY | 2" |
| SUB SPINDLE - SPINDLE NOSE | A2-5 |
| SUB SPINDLE - SPINDLE MOTOR | 20 hp |
| SUB SPINDLE - SPINDLE SPEED | 4,800 RPM |
| TURRET CAPACITY | 24 STATIONS |
| TURRET TYPE | HYBRID BOT/VDI |
| LIVE MILLING | Yes |
| LIVE MILLING SPEED | 6,000 RPM |
| Y-AXIS | Yes |
HAAS CNC CONTROL
HAAS SERVO LOAD 300 BAR FEEDER
SUB SPLINDLE
C-AXIS ON LIVE AND SUB
Y-AXIS
8.3" HYDRAULIC CHUCKS ON MAIN & SUB
HIGH TORQUE LIVE TOOL WITH C-AXIS (6,000 RPM)
24 STATION VDI/BOT TURRET
AUTOMATIC TOOL PRE-SETTER
BELT-TYPE CHIP CONVEYOR
PARTS CATCHER
ASSORTMENT OF TOOLING INCLUDING LIVE HOLDERS
NOTE: MACHINE CAME OUT OF SINGLE SHIFT SHOP, RARELY USED
HOURS AS OF 2/05/2024:
* MOTION TIME: 3,392 HOURS
* SPINDLE TIME: 3,134 HOURS
** COLLET SYSTEM ON MAIN SPINDLE IN PHOTO NOT INCLUDED. MACHINE WILL COME WITH (2) 8.3" CHUCKS.
** AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE
* REPLACEMENT COST FOR ABOVE SYSTEM IF PURCHASE NEW TODAY: $200,000
